Natural Gas Density, CV and Piping Dia Calculator

Natural Gas Composition

Ideally we can take default values for Indian Natural Gas. You can change the % composition if you wish to.

Methane (CH4)(Required)

Please enter a number from 0 to 100.

Ethane (C2H6)(Required)

Please enter a number from 0 to 100.

Propane (C3H8)(Required)

Please enter a number from 0 to 100.

n-Butane (C4H10)(Required)

Please enter a number from 0 to 100.

Iso-butane (C4H10)(Required)

Please enter a number from 0 to 100.

Pentane (C5H12)(Required)

Please enter a number from 0 to 100.

Pentene (C5H10)(Required)

Please enter a number from 0 to 100.

Non-Hydrocarbons(Required)

Please enter a number from 0 to 100.

Noble Gases(Required)

Please enter a number from 0 to 100.

Total Percentage

RH, Temperature and Pressure

Please Check!
Total composition can not be more or less than 100%.

Relative humidity of Air(Required)

Please enter a number from 0 to 100.

Temperature (in °C)(Required)

Gauge Pressure (in bar)(Required)

This field is hidden when viewing the form

Latent Heat Requirement Calculation

This field is hidden when viewing the form

Moles of Water

This field is hidden when viewing the form

Mass of Water

This field is hidden when viewing the form

Moles of O²

This field is hidden when viewing the form

Mass of O²

This field is hidden when viewing the form

Density at of Air at Sea Level

This field is hidden when viewing the form

Air needed for combustion

Assuming air is composed of approximately 21% oxygen by volume

This field is hidden when viewing the form

Saturation point of Air

This field is hidden when viewing the form

Absolute humidity

This field is hidden when viewing the form

Mass of Water contributed by atmospheric moisture

This field is hidden when viewing the form

Total mass of Water

This field is hidden when viewing the form

Latent Heat Requirement

Net Calorific Value based on the composition

GCV per kg based on the composition

Energy loss in process

NCV for the composition (in kCal/kg)

This field is hidden when viewing the form

AM3

This field is hidden when viewing the form

SCMH

GCV per SCMH

Energy Loss (per SCMH)

Assumptions: 1. Density of Air at sea-level conditions, using standard atmospheric pressure. 2. Air is composed of approximately 21% oxygen by volume.

NCV per SCMH

Please Note!
You have not entered the Relative Humidity of Air, So the Net Calorific Value calculation may not be accurate

This field is hidden when viewing the form

Z Factor Calculation

This field is hidden when viewing the form

Methane Z Factor

This field is hidden when viewing the form

Methane Molar Volume (L/mol)

This field is hidden when viewing the form

Methane Density (kg/m³)

This field is hidden when viewing the form

Ethane Z Factor

This field is hidden when viewing the form

Ethane Molar Volume (L/mol)

This field is hidden when viewing the form

Ethane Density (kg/m³)

This field is hidden when viewing the form

Propane Z Factor

This field is hidden when viewing the form

Propane Molar Volume (L/mol)

This field is hidden when viewing the form

Propane Density (kg/m³)

This field is hidden when viewing the form

n-Butane Z Factor

This field is hidden when viewing the form

n-Butane Molar Volume (L/mol)

This field is hidden when viewing the form

n-Butane Density (kg/m³)

This field is hidden when viewing the form

Iso-butane Z Factor

This field is hidden when viewing the form

Iso-butane Molar Volume (L/mol)

This field is hidden when viewing the form

Iso-butane Density (kg/m³)

This field is hidden when viewing the form

Pentane Z Factor

This field is hidden when viewing the form

Pentane Molar Volume (L/mol)

This field is hidden when viewing the form

Pentane Density (kg/m³)

This field is hidden when viewing the form

Pentene Z Factor

This field is hidden when viewing the form

Pentene Molar Volume (L/mol)

This field is hidden when viewing the form

Pentene Density (kg/m³)

Density

Please Check!
Temperature and Gauge Pressure is required to calculate the Density.

This field is hidden when viewing the form

Absolute Pressure

This field is hidden when viewing the form

Temperature in Kelvin

This field is hidden when viewing the form

R Gas Constant

Z Factor

The weighted average of the Z Factor is calculated using the Peng-Robinson Equation, based on the percentage composition.

Molecular Weight

Density

Piping Size based on Flow and Velocity

Please Check!
Temperature and Gauge Pressure is required to calculate the Piping size

Natural Gas Flow in KG per hour(Required)

in AM³

in SM³ (SCMH)

at 15 °C and 1 ATM

in NM³

at 0 °C and 1 ATM

NCV for the Total NG Flow

Please Note!
You have not entered the Relative Humidity of Air, so this NCV calculation may not be accurate

Velocity (in meters per second)(Required)

Ideal is 10 to 15 m/s

Please Check!
Velocity is required to calculate the Piping size

This field is hidden when viewing the form

Calculated AM3/hr

Required Pipe Diameter

This field is hidden when viewing the form

Show submit button

This field is for validation purposes and should be left unchanged.

Energy Requirement for Air Heating

Natural Gas Composition

RH, Temperature and Pressure

Latent Heat Requirement Calculation

Net Calorific Value based on the composition

Z Factor Calculation

Density

Piping Size based on Flow and Velocity

Website Update in Progress!